top of page

Our vision

Agla Power Transmission is guided by a philosophy that blends clarity in decision‑making, confidence in the future, and a proactive drive fueled by energy, engagement, and a genuine passion for well‑crafted work.

The Elastomers Division, born from the long-standing experience of Bottino Girardi S.r.l., represents a highly specialized hub in the molding of technical rubber components, supported by more than 60 years of consolidated industrial know‑how.

Focused on the processing of high‑performance elastomers, the division can develop and manufacture customized components based on customer specifications, operating both in a make‑to‑print logic and through co‑design. Applications cover a wide range of sectors, including automotive (aftermarket and OEM), truck, agricultural, construction, industrial plant engineering, as well as sports and wellness equipment.

The department is equipped with injection molding systems, along with integrated solutions for quality control, traceability, and material management. Production relies on certified materials and on a carefully selected range of compounds, developed internally or formulated according to the customer’s technical requirements.

Sfondo_2.png

Agla Power Transmission Compounds

logo-Bottino-Girardi.png

HNBR

logo-Bottino-Girardi.png

NR

logo-Bottino-Girardi.png

NBR

logo-Bottino-Girardi.png

VMQ

logo-Bottino-Girardi.png

AEM

logo-Bottino-Girardi.png

EPDM

logo-Bottino-Girardi.png

FKM

logo-Bottino-Girardi.png

EACM

logo-Bottino-Girardi.png

FVMQ

The process stages of the elastomers division

Molding
 

STAMPAGGIO.png

Post curing
 

POST CURING.png

Deflashing
 

SBAVATURA BOTTINO.png

Testing
 

CONTROLLO MACCHINA DI VISIONE AUTOMATICA.png

Cutting
 

TAGLIO.png

Statistical process control

CERTIFICAZIONI PRODOTTO.png

Assembly
 

Assemblaggio gomma_ok_edited.jpg

Products

A focus on injection molding

High‑performance production solutions

Rubber injection moulding is the most widely used method for mass production. This method ensures a high level of quality and precision in the finished component, whilst also allowing for the production of large batches.
 
Unlike compression moulding, in which the raw material is inserted at ‘room temperature’, heated and vulcanised inside the mould, in the injection moulding process the rubber is injected at higher temperatures and pressures through an injection chamber inside the closed mould.
 
Once the rubber has vulcanised, the mould opens and the cross-linked product can be removed, even through an automated process.
 
In the injection moulding process, we can utilise temperature-controlled tables, which ensure a reduction in moulding waste and an improvement in the quality of the finished product

STAMPAGGIO.png

Advantages

High dimensional accuracy

even for complex geometries.

Fast production cycles,

suited for high‑volume manufacturing.

Waste
reduction

enabled by controlled filling.

Consistent repeatability,

essential for sectors such as automotive.

Automation capability

with integrated unloading and quality control (e.g., end‑of‑line vision systems).

A focus on the TEST END OF LINE testing process

End-of-Line vision machines are automatic quality‑control systems that inspect parts directly at the end of the production process. Their importance lies in several key aspects:

Consistent and objective quality control

Every component undergoes an automatic inspection, ensuring uniform results and eliminating the variability typically associated with potential errors in human visual checks.

Speed and productivity

Vision machines perform inspections in real time, ensuring high throughput and no impact on production cycle times.

Reduction of scrap and returns

They immediately detect aesthetic or dimensional defects, preventing non‑conforming products from reaching the customer.

Cost optimisation

Reduced rework, minimized line downtime, and lower exposure to non‑conformity claims.

Traceability and data

Many systems record inspection results, providing valuable input for statistical analysis and continuous improvement processes.

CONTROLLO MACCHINA DI VISIONE AUTOMATICA.png

video Leonardo

Controllo qualità costante e oggettivo

Ogni componente viene sottoposto a un controllo automatico, garantendo un risultato uniforme ed eliminando la variabilità tipica dei possibili errori di un controllo visivo umano.

Velocità e produttività

Le macchine di visione lavorano in tempo reale, senza rallentare la produzione.

Riduzione degli scarti e dei resi

Rilevano immediatamente difetti estetici o dimensionali, evitando che prodotti non conformi arrivino al cliente.

Ottimizzazione dei costi

Meno rilavorazioni, meno fermi linea e minori rischi di contestazioni.

Tracciabilità e dati

Molti sistemi registrano i risultati dei controlli, utili per analisi statistiche e miglioramento continuo.

bottom of page